How to clean and condition leather boots

Adventure Andy

To clean leather boots, brush off the dirt, wipe them with a damp cloth, then wash them with a little foaming boot soap and let them dry slowly. To condition them, work a wax conditioner into the clean, dry leather and give it a day to set. Boot Soap does the cleaning. 2-in-1 Boot Wax conditions the leather and waterproofs it in the same coat.

You'll need:

How to clean leather boots

Boot Soap is a foaming cleaner that's easy on leather and won't dry it out. Less is more with it.

  1. Take the laces out so you can reach the tongue and eyelets. If they're grubby too, here's how to clean shoelaces.
  2. Brush off loose dirt and dried mud, including the seam where the upper meets the sole.
  3. Wipe the boots down with a damp cloth.
  4. Put 1-2 pumps of Boot Soap on a soft cloth and wipe the leather clean. Don't over-saturate it.
  5. Take off any extra soap with a damp cloth.
  6. Let the boots dry in a cool place, away from heat, before you condition them.

Try the soap on a hidden spot first, like the inside of the heel, to make sure it doesn't discolor the leather.

How to condition leather boots

Leather goes stiff as it dries out, and stiff leather can crack along the creases. Conditioning keeps it supple. 2-in-1 Boot Wax is made with beeswax and lanolin. It feeds dry leather and seals out rain and salt, so one coat does both jobs.

  1. Start with clean boots that have dried completely.
  2. Warm the wax into a paste by rubbing it in circles with a rag.
  3. Use the rag to apply it generously and evenly. Work extra into the seams, since that's where water gets in first.
  4. Let the boots dry for 24 hours.
Boot Wax warmed into a paste on the fingers, with a rag, beside a pair of leather boots

Test the wax on a small area first. Leather darkens when the wax goes on and lightens as it dries, so wait the full 24 hours before you judge the color.

The same brown leather boot before Boot Wax (top) and after (bottom)

Boot Wax works best on smooth leather. It also works on suede and synthetics, but for suede, nubuck or woven fabric, Rain Proof is the better match. Our guide to cleaning suede shoes and boots covers those.

Work boots, hiking boots and everyday boots

Work boots

Work boots pick up mud and road salt and flex all day, so they need the most looking after. Brush them off after a dirty shift so grit doesn't sit in the creases. Clean them with Boot Soap whenever they look grimy, and wax them more often than your other boots, with extra on the seams and toes.

Hiking boots

Knock the mud off after every hike and wipe away what's left with a damp cloth. Many hiking boots mix leather with suede or fabric panels. Boot Soap cleans leather, suede and nubuck and is safe on synthetics, so one bottle handles the whole boot. Wax the smooth leather and use Rain Proof on the fabric and suede. Our guide to waterproofing boots goes through mixed boots in more detail.

Everyday leather boots

Boots you wear around town need less. Wipe off dust and splashes with a damp cloth when you notice them. A full clean and a coat of wax a few times a year will keep them in good shape.

How often to condition leather boots

Go by how the leather looks and behaves. It's time for a fresh coat when:

  • water soaks in and darkens the leather instead of beading up
  • the leather looks pale or feels stiff, especially across the creases
  • the boots have been soaked through and dried out
  • you've been walking through salt and slush

Work boots in a wet, salty winter may need a coat every few weeks. Boots that see lighter use can go months between coats.

How to dry wet leather boots

Wet leather needs to dry slowly. A heater, vent, fire or hair dryer pulls the water out too fast and can leave the leather stiff and cracked.

  1. Take out the laces and insoles.
  2. Stuff the boots with newspaper. Swap it for dry paper when it gets damp.
  3. Leave them at room temperature, somewhere with a bit of airflow and away from heat.
  4. Once they're completely dry, give them a coat of Boot Wax. Soaked leather often dries out stiff, and the wax feeds dry leather.

How to get salt off leather boots

Road salt leaves white lines on leather and dries it out. Clean it off soon, before it has time to set in.

  1. Wipe the salt lines with a damp cloth.
  2. Clean the boots with 1-2 pumps of Boot Soap on a soft cloth. It lifts dirt and salt.
  3. Take off any extra with a damp cloth and let the boots dry somewhere cool.
  4. Wax them once they're dry. Boot Wax seals out rain and salt, so the next round of slush has a harder time getting in.

If faint salt lines show up again as the boots dry, repeat the clean before you wax.

One kit for smooth leather boots

The smooth leather version of the Boot Revival Set has the whole routine in one box: Boot Soap to clean, 2-in-1 Boot Wax to seal and Boot Medic to freshen the inside. Clean the boots and let them dry, wax them, then give them two sprays of Boot Medic inside overnight whenever they need it. There's also a version for suede, nubuck and woven boots that comes with Rain Proof in place of the wax. Everything is in our boot care collection.

Questions people ask

What's the difference between a leather boot cleaner and a conditioner?

A cleaner lifts dirt and salt off the surface. A conditioner feeds the leather so it stays supple. Clean first, then condition, because wax put on over dirt seals the dirt in.

Can I use Boot Wax on suede boots?

It works on suede, but it works best on smooth leather. For suede, nubuck and fabric, use Rain Proof.

Why did my boots go darker after waxing?

Leather darkens when Boot Wax first goes on and lightens as it dries. Give it the full 24 hours before you decide.

How do I get the smell out of leather boots?

Give them two sprays of Boot Medic inside and leave them overnight. Our guide to getting the smell out of shoes and boots covers drying and insoles too.

Back to How-To Guides

Leave a comment

Please note, comments need to be approved before they are published.